We're also including a sweet photo collection of the best spots to place the mounts for maximum use and optimal visibility. The Swivel Mount installs onto any dash with powerful 3M VH adhesive and can be adjusted to find the ideal viewing angle.
For older Ford F-Series trucks, the best place to mount is still the center driver’s side air vent. There's also plenty of space to install Reform's magnetic dash mount.
There is also an open space just above the driver’s side center air vent, which easily fits a Low Pro Mount. Stick the mount on the top slate, so airflow won't be blocked by your phone, and you can stay cool.
The air vents are smaller than what you'd find in the Chevy or Ram, so a Low Pro or Swivel Mount are your best options. The Swivel Mount may be the newest Reform car mount, but we've already received tons of great feedback from our customers.
Jeep air vents are typically smaller, so we'd recommend sticking with the Swivel Mount (pun intended!). Fusion Pro is fused from the finest materials, including CNC-machined aircraft grade aluminum and carbon fiber, plus high quality CPU and tough polycarbonate.
Raised edges offer protection for your screen while the anti-slip grip prevents your case from getting scratched. The quality of the Fusion Pro is clear not only in its durability, (it exceeds military drop test standard MIL-STD 901G-516.6) but also in its thoughtful design.
You don’t need to worry about poor design and functionality with this case. The ultra-responsive buttons and easy access ports help create a seamless user experience.
After I unbuckled myself and turned the engine off I looked for my phone and no joke, it was exactly where it been before the roll...right there in the mount holder on the dash. With it being extended out as far as it was and with the weight of my Note 5, I'm impressed to say the least that it didn't break from the whiplash of the impact or fail to hold my phone through it all.
*I should note that my eyes were on the road when I lost control. It was an icy morning and I caught a patch of ice while accelerating which initially caused me to spin out.
Amazon.com, amazon.com As long as you install it on your windshield or dash, avoid putting it on any leather or faux-leather (so if you have a fancy car, def use the windshield, or even the plastic part of the middle console), and follow the included directions to remove it safely, it's basically infinitely re-positionable. This January, a full nine months later, it finally fell off the dash onto my seat.
I have it mounted far forward where the dash curves down, fully extended and hanging precariously like a tree off the side of a cliff. All the hot and cold extremes here in Minnesota and all the vibration, bouncing around in travel, starts and stops, and it finally let go.
I brought it to the house and washed off the dust it collected in the fall with a little soap and warm water and re-attached it. You simply put your phone into the mount, which depresses the center button, which clamps down the two side arms.
That means you can have it work with many types of phones, and still be plugged in for charging! The phone is then easily released with one hand by pinching in the two side levers.
Not only does a car mount keep your phone out of your hands, but they give you a great viewing angle for your device when you need to check turn-by-turn directions. This is necessary in order to get your iPhone to attach magnetically to the car mount, which slides over your car's air vent slots.
To top it off, if you plug in the car mount, it can act as a wireless charger for your device. Considering how much battery can be drained with using Maps, you shouldn't need to worry about your iPhone running out of juice.
Ocean-friendly Not only is the Lightproof WAKE a nice-looking iPhone case, but it's made from over 85% ocean-based recycled plastic. You don't have to spend a lot of money to get a protective case with a cute and trendy look.
Lucky for you, in this buyer’s guide 2018, we’ve reviewed the TOP 6 Best Wireless Car Chargers along with their differentiating features. These pocket computers have become something of an extension of our minds, as we spend the majority of our time “plugged in”.
Are you tired of worrying about how much of your battery you use as you idly peruse your phone in lines, in restaurants and other places, when it may be a decidedly long time before you can charge your device again? Well, unsurprisingly, car chargers for wireless devices are quite a big business these days, and there are countless brands, styles, and technologies available to choose from as a result.
Below, we’re going to learn a little about the two types of charging methods commonly used today, the handful of technologies used to obtain power from your vehicle, and of course, look at some top chargers following a few form factors and styles. There are basically two types of charging methods used to deliver power to a smartphone or tablet.
The concept of induction for delivering current was actually pioneered by Tesla over a century ago, but it was never that practical for most devices before efficient rechargeable batteries were invented. Induction creates a high-powered electromagnetic field (note: this doesn’t cause magnetic effects) which then converts to current as it contacts the charges on the battery.
This is the hallmark of a less than well-engineered phone or charger, one or the other, but it does seem to be one of the common problems this approach suffers from. Generally, there are three types of charger form factor designed with vehicles in mind.
These rigs hold the phone, allowing hands-free use, while also charging the device, and in some cases, depending on the other accouterments present in the vehicle, a multimedia smart experience. Finally, there are a number of general chargers just intended to fit in the center console, on top of the dashboard or anywhere level, which phones can cradle into, lay atop, or plug into, delivering a charge.
The most popular is a mounting system, though depending on how they get power, they can be a lot harder to install, and could be problematic in the case of accidents. If you just want it to charge, then a cup holder or generic cigarette lighter charger will work for you, and not provide some difficulty and inconvenience that a mount will.
Beyond that, optimal charging speed, support for your type of phone (primarily in the sense of form factor), price and power source will be your biggest concerns. It requires an additional adaptive coupling to either the cigarette lighter or the car’s electrical system in order to deliver power.
Induction charging is surprisingly quick, due to the absence of modulation bottlenecks and physical transmission media to carry the energy. It will not, however, work with smartwatches and handheld gaming devices which have interference-resistant circuitry that still somehow passes FCC regulations.
This charger also provides induction charging, compatible with most modern devices. This is a hybridization of the mount /cradle concept, intended to simply sit in the cigarette lighter plug.
The induction charging is very fast, but the USB is only 2 .1 A which is incredibly slow for most modern devices. If you want the features of a mount, and don’t mind this obscuring your dash controls, this might be a suitable compromise for you.
The induction means most mobile devices made after 2016 will charge without having to fret over whether you have the right USB cable. The gooseneck is adjustable, but this may swing around in the plug, or wobble a lot on bumpier roads, or on a vehicle with less than excellent shocks.
It does not provide charge, meaning you will still want a USB adapter which connects to your cigarette lighter. This is a solid, easily-adjusted mount with an industrial suction cup which holds up well enough in heat and rough roads.
It doesn’t provide any electrical charge on its own, being just a mount, so you will, in fact, need an additional charger unit of some sort. Pros:Cons: Supports all phone form factors, and some smaller tablets.
Suction cup mounting doesn’t damage windshields or dashboards. Suction cups, while of high quality, in this case, aren’t as long-term reliable as other methods of mounting.
The absence of an adapter means an additional purchase is necessary to deliver power to this mount, and the induction technology isn’t guaranteed to work with some older phones and battery types. However, it is convenient since it eliminates worrying about which charging port type the phones and tablets have.
Pros:Cons: Supports all phone form factors, and some smaller tablets. Suction cup mounting doesn’t damage windshields or dashboards.
While the quality of this as a physical mount isn’t quite up to snuff compared to the previous unit, the induction charging feature is rather convenient and immediate. If you don’t want to fiddle with different cable ports all the time, you might find the slightly weaker build quality worth it.
The foam grips are a bit dodgy, compared to the mounting design used in the previous section, though the padding itself is quite nice. Pros:Cons: Supports all phone form factors, and some smaller tablets.
If you want a mount that doesn’t fasten to the dashboard, and converts your cigarette lighter into a multi-source power supply, this may be worth a look. Just bear in mind your space and your placement of cup holders before committing to this one.
Quadrille 120W/10A sits in the cup holder, and simply provides multiple USB ports to charge various devices, no frills. It plugs into the cigarette lighter, and requires no assembly, mounting or other adjustments to get it working.
This is basically just a multi-tap USB charger that draws power from the cigarette lighter and can charge up to five devices at a time. This is designed to provide this kind of multi-tap power source without it being in the way on your console or on your dashboard, which can be quite convenient.
As for wireless, it works with any phone or tablet made within the last few years, and honestly, several older designs as well. If the charger doesn’t work on the device, it simply won’t take a charge, there will be no lasting effects.
If it takes the charge, the current produced grounds into the trickle circuit connected to the battery. The field produced by induction has no effect on the human body whatsoever.
Mine had high-grade suction cups, which worked most of the time, though when it got very hot, sometimes it’d lose grip out of nowhere and fall down. Another problem with This is, passengers have had a tendency to bump elbows or even knees on them when they climb into my car with too much of a sharp angle of attack, causing them pain and knocking my charger off.
Currently, I just use a cigarette lighter charger with a somewhat canister form factor, that has several USB ports on it.