Whether you drink coffee, water, soda or juice, this universal holder can accommodate your beverage of choice. The grip adjusts to any sized beverage from 2.35” to 3.95” in diameter, making it suitable for holding a cup, bottle, thermos or can.
When you’re out for a stroll, riding your bike or simply enjoying the fresh air, it’s convenient to always have a drink at hand. This upholder mounts onto a 1-inch tube frame, easily clipping onto most walkers, wheelchairs, bicycles, transport chairs and bed rails, so you can enjoy your beverage whether you’re indoors or out.
This attachment mechanism can be set at any angle to ensure that despite the degree of the frame, your drink will always be leveled. Measuring 4.5” x 8” x 1” and weighing less than half a pound, the Aired won’t add cumbersome weight or bulk to the product it’s attached to.
The top pitchers and bottom platform fold inward so, when not in use, the holder has a super-slim profile. The top pitchers adjust from an inner diameter of 2-3/8" up to a full 4", and hold any can, bottle or cup within this size range snugly and safely.
This is simply a great product and has allowed my wife to better utilize her walker during her rehabilitation. Used on Scooters, Wheelchairs, Stadium, Airplane, and Office Chair Armrests.
I've always been a consumer of water for hydration and to maintain pristine urinary tract health, but I found it difficult to reach water bottles or glasses from my vantage point. After browsing through my options (using such keywords as “wheelchair,” cup holders,” and “sold by Amazon”), I stumbled upon the OH-4. I scanned the specs and thought “OH 4 sounds A OK.” With its sleek, simple design and excellent architecture of plastic and Velcro the OH-4 proudly pronounces my fondness for -not only water- but the immaculate bearer of water itself. A Highly Grail, if you will.
A wish answered by the Fairy Quad mother. Anyone who wants to partake of drinks while cruising about in a wheelchair need to look no further: the OH-4 is an OH-5-star product! UPHOLDER IS ADJUSTABLE to hold and secure different size cups and drinks from 2.25” to 3.75” in diameter.
Holder height is 4” with an opening to allow for cup and coffee mug handle. FOLDS QUICKLY when not in use preventing damage to the upholder and keeps your mobility product streamlined.
Fortunately, I can still fold up my collator when the upholder is closed up. My collator uprights tilt backward, so the only way to get the upholder horizontal was to mount it on the left or right side of the tube. With this armrest pouch, you have a place for your essentials such as your phone, small snacks or your medications.
Take joy in the freedom knowing you can carry the stuff you need by yourself. Each small experience matter and knowing that you can take care of certain things yourself is a priceless feeling.
Easily keep your essential items nearby and hands-free instead of continually worrying about finding a place to hold your drink. Be free from the burden of having to carry things constantly with your hands or on your lap.
I can get my phone, my small wallet, keys and headphones with room to spare. Wheelchair Cup Holders, Pro CIV Bike Upholder fits Baby Stroller, 360 Degrees Universal Pushchair Bicycle Strollers, Bike, Mountain Bike and Wheelchair, Black Review: I think most people on here write reviews expecting things to work flawlessly in EVERY situation without any creative thinking on their part.
With a little creative thinking, I purchased these and an articulating “umbrella holder (also to protect his chair in the event of rain). Simple fix was a small piece of kitchen drawer liner inside the clamp and BA MMM, no more sliding.
At first, we used a small Thermos insulated kids cup with the built-in straw and clip cover, and it works perfectly without any issues. The problem with this set up was how quickly he ran out of water, so we went to Walmart and purchased a Congo 20oz metal insulated thermos with built in straw.
This thing was heavy and the plastic arms of the upholder could not support the weight of the thermos filled with ice water. Simple fix was a piece of 3/4in self-adhering Velcro wrapped through the upholder arms and around the thermos.
The BodyHealt weighs less than half a pound, so it won’t add any cumbersome weight or bulk to the mobility equipment it’s attached to. This upholder is designed to fit standard size cups, bottles and cans, and even boasts a slot on both sides to also accommodate mugs with handles.
Attaching the upholder onto your mobility equipment is quick, easy and doesn’t require any tools. Simply place the clip over your handlebars, then insert and tighten the thumbscrew with your hands, and you’re ready to roll.
With the BodyHealt Adjustable Upholder, you can always have a drink close at hand. This holder is outfitted with a clamp that fits 1-inch diameter tubing and comes with inserts for smaller frames, allowing you to attach onto most walkers, wheelchairs, bicycles, collators and knee scooters.
Upholder can rotate 360 degrees enabling installation on vertical and horizontal tubing. Can be easily fitted on handlebar steering column and frame of knee walker.
Made with durable, rugged, yet lightweight plastic and metal materials. 360° ROTATION Designate direction of the holder is adjustable which means it can keep the bottle balance when the pole is not vertical or clinic.
Airspace Collator Upholder, Adjustable Universal Size Heavy Duty 360 Degree for Drive Med line Wheelchair Walker Bike Review: This product does exactly what I need it to do, namely attach to my arm crutches and carry a paper coffee cup from the café to my office. While it would also be nice to carry a massive fountain beverage, that's not really reasonable and would throw me off balance anyway.
Note, if you frequent Starbucks, be sure to get the free green stopper thing to avoid spills. No directions come with the package, so you are left to wonder how hard do you push the upholder plastic mounting piece to install onto the sidebar of your walker.
The upholder is quite sturdy and holds both soft drink cans and a Congo cooling thermos of water. I gave it four stars because I wish I could remove it when we put the walker in the car for trips.
It's a bit more bulky sticking out on the side but than ALL upholders on walkers tend to do that. We are traveling for a few months and my walker is going in and out of our van constantly, yet the upholder has taken the push here and there with no problems although I'm not rough on things so that helps too.
Easily attaches to keep a drink nearby when using wheeled walkers, Collators, transport chairs/wheelchairs Not the products fault, but just wanted to make that note in case anyone else was thinking of doing this.
We have spent around 39 hours to find the right option for you and based on our research Accor Stroller Upholder, Bike Upholder, Universal Bottle Holders for Stroller, Bicycle, Wheelchair, Walker, Trolleys, 1 Pack is our top pick for you. However, if you don’t want to spend extra then we have another great option for you is Accor Stroller Upholder, Bike Upholder, Universal Bottle Holders for Stroller, Bicycle, Wheelchair, Walker, Trolleys, 1 Pack.
SHAKE Water Bottle Cages, Basic MTB Bike Bicycle Alloy Aluminum Lightweight Water Bottle Holder Cages Brackets(2 Pack- Drilled Holes Required) Features 4 X M5 x 12 SCREWS INCLUDED: The screws are standard size for water bottle mounts to most of the bikes with DRILLED HOLES, and washers are suggested for tight fixing.
6061-T6 HEAT-TREATED Aluminum ALLOY: High quality material and manufacturing process for extra strength and durability combined with low weight, 2.1 oz (61g) each. EASY INSTALLATION: Use a 4 mm hex key (included) to fasten cages in screw holes on frame.
So it can be fitted on handle bar, under seat, down tube, fork, front pipe or other angle. With this bottle holder, your drinks will within your reach when you're walking on the park or cycling outside.
Compatible with most baby strollers, bicycles, walker, wheelchair, scooter on the market. It can be fitted on handle bar, under seat, down tube, fork, front pipe.
Ieasky Bike Water Bottle Holder No Screws, 2 PCs Adjustable Bicycle Water Bottle Rack Cage 360 Degree Rotating for MTB Stroller Motorcycle Black Features high Quality & DurableThe bike bottle holder is made from eco-friendly plastic steel and metal parts that is safe and harmless.
360 Degree Rotation & AdjustableThe water bottle cage for mountain bike can be 360-degree rotation and adjustable that make it easy to hold the water bottle or drink cups. equipped with Gasket & Anti-slipThe bike cup holder is equipped with gasket to prevent scratches, anti-slip that can securely hold your cup or bottle in place and keeps your drinks from spilling or falling off.
widely Sedate motorcycle cup holder set is available two ones to meet your various need that support the bottle size: 70-100 mm/2.75-3.94inch(diameter). It is perfect to place it in the handlebars, engine guards, and it also fits most baby stroller, pushchair bicycle, umbrella car.
You can easily reach the bottle with one hand without having to stop cycling. The pull cord can be tightened to keep your bottle comfortable and prevent it from bouncing and bumping.
The side buckles provide extra storage space for your small items and is also convenient for you to use. KEEP YOUR DRINK HOT/COLD: Our water bottle holder with aluminum foil inner layer is designed to keep your drinks cold in hot weather and warm during your cycling in winter.
Features the stroller cup holder has universal 360° degrees rotation design. You can adjust it to what you wants angle. the PP plastic and unique design holds water bottle during cycling.
Sport drinking bottle is made of durable, squeezable clear polyethylene. The push/pull cap is easy to open and close and allows for a strong flow of water to quench your thirst.
Great for road, mountain, hybrid, touring and electric bicycles and can be used by the professional cyclist or someone riding just for fun. Our premium plastic bottle holders are designed to last and support you on your biking adventures, races, triathlon or riding on the roads.
We are a family-owned business that prides itself in excellence, as demonstrated through our premium craftsmanship and unbeatable customer service. Located in Ohio, we are proud to manufacture high quality products in our state-of-the-art factory.
Features Waterproof Fabric: It will not wet the cup holder even if the glass leaks, and you can take it out even if the rainy day. Suitable: The bike cup holder is suitable for bike like CROSS-COUNTRY, FREE IDE(FR), DOWNHILL(DH), TRAILS, etc Design: The Velcro is adjustable to fit your bicycle handle bar.